Bed rails are perhaps the most important elements of your bed frame that conduct the weight of your mattress to the floor and away from you when you are sleeping on it. Slats are usually solid wooden boards which are employed to support the bed when there's no box spring attached. Many bunk beds employ slats for the bed rails as well. The actual term for bed rails is "box spring". Slats are usually notched along their length in order to prevent the headboards from shifting while the bed is being used.
Bed rails can be purchased from most home furnishing stores or bedding shops. They can also be purchased from online stores and bedding suppliers. Bed rails, although they can be quite pricey, will pay for themselves many times over in savings once you have your bed assembled. Click here for more insights about bed rails.
When setting up a bed with bed rails, the first thing to do is measure the dimensions of your bed so that you'll have a clear idea of how much room you'll need for this purpose. You'll want a minimum of a foot between each board for the headboard and footboard, and another foot between the rails and the sides of your bed. You will need a minimum of a foot between the top and bottom of your bed as well. Those are the measurements of how far apart the rails from your bed are.
When buying a bed rail, try to get ones that match the design and color of your bedding. If your bedding uses printed bedding, try to get to bed rails which have the same print. If possible, choose bed rails which match the bedding color. If you're unable to find bed rails that have the same print as your bedding, then look around until you find bedding which has similar patterns or colors. It's always worth a try!
If you're going to use raised bed rails (i.e., those that go up to at least three or four feet above the bed), then make sure that your bed has enough room to be able to comfortably fit the bed rails without being too high or low. This means that you shouldn't have to back your bed up on anything, including books or other articles of clothing. Ideally, the bed rails should be placed where your bed will sit level with the floor. This is especially important if you have children, since they may roll off the bed and injure themselves.
One final note: If you're going to install your own bed rails, be sure that they install securely. If the rails aren't mounted properly, you might have to remove the headboard or the bed in order to tighten the screws or bolts. Be careful when doing this! If the rails aren't mounted securely, it might very well nip your bedding material, or worse, actually bite into it. View site for more enlightenment on this topic: https://en.wikipedia.org/wiki/Bed_frame.
